| 12 Volt Linear Power Supply Units - Battery Monitoring Models |   |
|
Where compliance to a standard is not required the BML Range
of PSU's fulfils the need of limited monitoring for 12v systems.
Depending on battery requirements there are a range of enclosures
that are manufactured to meet an output/battery configuration
up to 76 Ah battery standby periods.
Note
:
Metal Enclosures are available in Hinged
(click for image) or Clam
(click for image)
Type Boxes. When ordering add the letter "C" to the above
Product Code for Clam Type Box e.g.:
1201BML = 12v 1 Amp in Hinged Box
1201BMLC = 12v 1 Amp in Clam Box.
|
|
|
The
Model pictured is the 1203BML :-
| MODEL
SUPPLIED |
1201BML |
1202BML |
1203BML |
1205BML |
|
Regulated
DC
Output |
1
Amp Nominal |
2
Amp to Load |
3
Amp to Load |
5
Amp to Load |
| Mains
LED |
GREEN |
GREEN |
GREEN |
GREEN |
| Fault
LED |
RED |
RED |
RED |
RED |
| Charging
LED |
YELLOW |
YELLOW |
YELLOW |
YELLOW |
| Fault
Relay |
See
Below |
See
Below |
See
Below |
See
Below |
| Box
Size |
330
x 330 x 80 |
330
x 330 x 80 |
330
x 330 x 80 |
330
x 330 x 80 |
The design is a microprocessor based intelligent unit and offers
an LED indication plus alarm signals (through on board voltage
free change-over contacts) and are generated in the following
instances:
- Mains
Fail
- Fuse
Blown
- Battery
Missing
In
addition to the above the range offers the following features:
- 13.8
v DC Regulated Output
- Full
Current to Load
- Additional
Battery Charging Current
- Short
Circuit protection
- Mains
Present Indicator
- Fuse
Blown Indicator
- Battery
Charging Indicator
-
Fault
Relay
- Mains Fail (Separate Alarm Relay Timed Delay).
- Fuse Blown
- Battery Missing
- Deep Discharge Protection
- Mains transient protection
- Battery current limiting protection circuit.
- Front Tamper Switch
|
| MAINS
INPUT |
220
- 240V AC 50/60HZ |
| D/C
OUTPUT |
Full
Stated Load @ 13.8V DC excluding Battery Charging circuit. |
| LOAD
VOLT REGULATION |
5%
Maximum |
| OUTPUT
RIPPLE |
<
5% OF THE NOMINAL DC OUTPUT VOLTAGE |
| ENVIRONMENT |
Ambient
Temp -20 to + 40ºC Relative Humidity 10 to 90% |
| BATTERY |
12
Volt Sealed lead acid maximum 1 x 7ah |
| DEEP
DISCHARGE PROTECTION |
Disconnects
battery from load when battery voltage drops below 10 volts. |
| FAULT
INDICATOR L.E.D. (RED) & RELAY |
Mains
Fail, Fuse Blown & Battery Missing. |
|
|
Products / Power supplies / 12v
Range / Battery Monitoring Models
